This ad is for a snout/nose rebuild service for the Eaton M45 supercharger. All bearings are professionally removed and replaced using high quality SKF bearings selected to match the high speed, temperature and specific supercharger clearances as required by OE specification.
Vehicle: BMW Mini John Cooper Works (JCW) 1.6 Ltr. Fitment of 1 x SKF OE Spec Outer Bearing. 1 x SKF OE Spec Inner Bearing. 185ml of the oil in a reusable 200ml plastic bottle / 145ml Front + 40ml For rear if desired.
60ml syringe with small bore pvc hose for drawing out the old oil/inserting the new. Snout bearings and seals are one of the most common element to wear out on a supercharger as they are taking the undamped strain of the drive belt. Fortunately with a few workshop tools such as a hydraulic press and if needed a blow lamp they can be replaced with this kit.
A major sign that your bearings might need to be replaced is a rattle from the supercharger at idle and when worse excessive supercharger noise although this can also be a sign of further bearing failure. Another very common failure is the sprung coupler that connects the snout drive to the rotors inside. In most cases a rattle from the supercharger is caused by this but can be remedied very easily. We always advise inspecting the isolator thoroughly, common failures are broken springs and cracked plastic. Look carefully as hairline cracks will open up when in service, this also applies to ageing solid couplers.Please note that this kit does NOT include an isolator. If you supply your isolator/coupler with the snout we will inspect it as part of the rebuild service and report on it's condition. This is a rare occurance and is typically aimed towards diy failures where the snout has been damaged or customised. As our rebuild services require the pulley to be removed, if you are considering a performance upgrade now would be the perfect time. On some pulleys the snout requires reduction machining in order to fit, a service that we offer and that is more cost effective to be done at the same time as a rebuild. If you are interested in our power pulleys please see our other listings for pulleys or our full rebuild services including upgrade. Powerhouse Automotive (UK) Ltd is based in Chesterfield, England. We supply the UK and world retail and trade markets with uprated supercharger pulleys for Jaguar and Range Rover cars.
We also offer rebuild services for Eaton superchargers used on these vehicles, and stock a range of bearing kits for home repair. Under our BrakemastersTM trading arm, we are UK and world leaders in motorcycle brake caliper rebuild services and seal kits. Specialising in motorcycle brakes for years, we have developed an unrivalled range of components and application knowledge. We are also official agents for Highpower Wizards of Nos nitrous oxide systems, with 25 years' enthusiastic experience of nitrous injection.Weekend orders (2pm Friday onwards) cannot be processed until Monday. Those dates are NOT guarantees, they are'best possible', and actual times can be much slower. UK Customers : UK 2nd class small packet post can take a week. We have no control over this, so please try to accept that we are not responsible for slow post. If you require tracking, please select the additional cost services at checkout. If we have sent an incorrect or faulty item, we will of course cover reasonable return post expense. Please ensure that you have ordered for your correct model and year of vehicle. We recommend you have items fitted by a qualified professional mechanic, and cannot be held responsible for faults which result from incorrect fitting and assembly. Cet item est dans la catégorie "Vehicle Parts & Accessories\Car Parts & Accessories\Engines & Engine Parts\Other Engine Parts". Le vendeur est "powerhouse-uk" et est localisé dans ce pays: GB. Cet article peut être expédié au pays suivant: Monde entier.